+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: New Remote-7 channel 5 dead (/showthread.php?tid=2234)
New Remote-7 channel 5 dead - t_byrd - 12-06-2023
Hello,
I just recently purchased a Remote-7 and after some extensive troubleshooting it seems like channel 5 is not outputting any data. I am pretty familiar with the MRCC routing at this point and I'm not doing any "advanced" routing or filtering, just some simple 1 to 1 patching from a sequencer/MIDI controller.etc. I am using the Remote 1-5 mode and I have patched all my MIDI sources to all 5 remote channels. I'm using all new MIDI cables and swapping the cable on 5 doesn't help.
To put it simply, I can get all of my MIDI sources to play nicely with the devices connected to the Remote-7 output, except when I am using channel 5. I did a simple test of having a sequencer play a synth and physically connecting the synth's MIDI input to each Remote-7 output individually, they all worked except for 5.
Maybe a hardware issue? Any troubleshooting suggestions?
Thanks.
RE: New Remote-7 channel 5 dead - Jesse Johannesen - 12-10-2023
I'll take care of this for you. I got your email and will respond over there. Talk soon.
RE: New Remote-7 channel 5 dead - t_byrd - 12-14-2023
(12-10-2023, 11:17 PM)Jesse Johannesen Wrote: I'll take care of this for you. I got your email and will respond over there. Talk soon.
Hey Jesse,
I'm not sure if your email went through, I never received anything. I just tried to email you directly. You can shoot me a PM as well. Thanks.