+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: MRCC prog change issue (/showthread.php?tid=1845)
MRCC prog change issue - Stratblue - 01-09-2022
Hi there.
I have set the MRCC to receive prog changes on channel 16 input 1 but it seems to respond to all channels.
RE: MRCC prog change issue - Jesse Johannesen - 01-10-2022
Oh interesting. Can you try changing it temporarily and then reverting to the settings you want to use and see if resetting them makes any change in behavior?
RE: MRCC prog change issue - Stratblue - 01-16-2022
(01-10-2022, 05:51 PM)Jesse Johannesen Wrote: Oh interesting. Can you try changing it temporarily and then reverting to the settings you want to use and see if resetting them makes any change in behavior?
I have set it to receive on various channels and ports 1&2 as an experiment and the problem persists. Is that what you suggested?
RE: MRCC prog change issue - Jesse Johannesen - 01-17-2022
OK, sounds like that might be a bug. I'll see if I can reproduce it on my end and let you know.
Jesse
RE: MRCC prog change issue - ttck - 02-21-2022
I am experiencing exactly the same problem on my end as well.