Conductive Labs Support Forum
Is there a way to create a filter that converts note data to CC? - Printable Version

+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: MRCC Advanced Configuration (https://conductivelabs.com/forum/forumdisplay.php?fid=24)
+--- Thread: Is there a way to create a filter that converts note data to CC? (/showthread.php?tid=1795)



Is there a way to create a filter that converts note data to CC? - TheKillerBeeRelayTeam - 11-17-2021

Long story short, I want to take the midi note data from my other gear, run it through the MRCC and back out to my Roland TR8s to control the pitch/tune of (any) one of the instrument channels.

From the MIDI data sheet and a whole bunch of RTFMing, the Tr8s only accepts CC data for pitch changes since the note data triggers the drums like most drum machines. 

Is there a filter option that can do this sort of thing that I have missed in the MRCC manual?


RE: Is there a way to create a filter that converts note data to CC? - Jesse Johannesen - 11-17-2021

No unfortunately that isn't one of the modifiers available on the MRCC. It seems like it would be a pretty easy first arduino MIDI project though. I bet it would be pretty straight forward to make a program that takes input pitches on one channel and outputs a CC on the same channel. There's a youtuber called Notes and Volts that has a pretty newb friendly tutorial series on Arduino MIDI hacking you might enjoy.
https://www.youtube.com/playlist?list=PL4_gPbvyebyH2xfPXePHtx8gK5zPBrVkg


RE: Is there a way to create a filter that converts note data to CC? - TheKillerBeeRelayTeam - 11-26-2021

Thanks!

I was able to find a video that shows EXACTLY how to do what I am looking to do..I just need to add a ZOIA to the rig now.


"darn."

https://www.youtube.com/watch?v=HUAdZWhYO-8