+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: .35 FW - can you save presets? (/showthread.php?tid=1764)
.35 FW - can you save presets? - Raphie - 10-17-2021
I’ve received my MRCC last week. After some initial startup problems the unit now works fine.
However I can’t seem to save presets?
I go to the preset menu
Change Factory to User 1
Navigate to save box so it’s framed white
Press and hold blue SHIFT + Enter (black plastic button between 2 white buttons)
Unit bricks and needs power cycle
After powercycle unit reboots into factory
I did re-initialize with green button, but no difference
What am I doing wrong?
RE: .35 FW - can you save presets? - Raphie - 10-17-2021
I worked with Jesse from support and my sdcard was wonky, I replaced it and all is good now
RE: .35 FW - can you save presets? - Darryl - 10-19-2021
Good news, sorry about the bad SD card. That's the first bad one we've seen. Aren't you lucky ;-)