+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: The NDLR (https://conductivelabs.com/forum/forumdisplay.php?fid=1)
+--- Forum: MIDI Connectivity (https://conductivelabs.com/forum/forumdisplay.php?fid=5)
+--- Thread: Clock Manipulation (/showthread.php?tid=1747)
Clock Manipulation - qdrnmx - 09-22-2021
Hello, new noodler here. Query about the 1/8 clk setup:
If I clk out to a Rucci Clock Manipulator and then return its output to clk in, what’s gonna happen?
https://handmadeelectronicinstruments.com/product/clock-manipulator/
Manual says:
“Clock In” must be enabled in the Settings 3 menu. It must be set for “ClkIn CV”. Once this is set The NDLR uses the input pulse signal as it’s internal “heart beat”.
But the Rucci gear uses the clk out as it’s source material, so I’m guessing it wouldn’t works as intended?
Thoughts, criticisms, jokes all very welcome!
qdrnmx
RE: Clock Manipulation - Jesse Johannesen - 09-22-2021
Yeah, I believe you are correct. The NDLR will not even output a clock unless it's receiving a clock at the input (if it's set to external), so it would just sit there forever.
RE: Clock Manipulation - qdrnmx - 10-28-2021
Yes! A substantially more succinct explanation. Cheers!