+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: The NDLR (https://conductivelabs.com/forum/forumdisplay.php?fid=1)
+--- Forum: MIDI Connectivity (https://conductivelabs.com/forum/forumdisplay.php?fid=5)
+--- Thread: Start/Stop and arming parts (/showthread.php?tid=1620)
Start/Stop and arming parts - cee- - 07-18-2021
Hi,
My NDLR is configured to receive ext. clock. All works fine, I can externally start and stop the jam and change tempo.
However, when I stop ext. while all (or some) parts are playing, there's no way to start over with silent parts. Only if I stop the parts *before* stopping the jam, the parts will be silent on restart.
Is there a way to disarm parts prior to starting?
Thanks + regards from Germany, cee-
RE: Start/Stop and arming parts - Jesse Johannesen - 07-18-2021
I can relate to the frustration on this issue, unfortunately I haven't found a perfect solution to this either, I just tend to end up using NDLR as my Clock source in most situations as a result, it usually saves me a headache.
Jesse
RE: Start/Stop and arming parts - cee- - 07-20-2021
Good to know that I'm not alone... :-)
A simple solution would be to press play/stop repeatedly, and the second press would be the master disarm command.
Anyway, keep up your good work, BR, cee-
RE: Start/Stop and arming parts - Dirk Offringa - 07-25-2021
(07-18-2021, 11:03 AM)cee Wrote: Is there a way to disarm parts prior to starting?
Double stop on the master device disarms all parts
Cheers
Dirk
RE: Start/Stop and arming parts - cee- - 08-13-2021
(07-25-2021, 01:22 AM)Dirk Offringa Wrote:(07-18-2021, 11:03 AM)cee Wrote: Is there a way to disarm parts prior to starting?
Double stop on the master device disarms all parts
Only if the master *has* some sort of double stop implemented; afaik it's not a Midi command but just a 'stop' followed by 'all sounds/notes off'.
cee
RE: Start/Stop and arming parts - Jesse Johannesen - 08-15-2021
I think you just have to press stop twice on the master, no?
Jesse
RE: Start/Stop and arming parts - Dirk Offringa - 08-15-2021
(08-15-2021, 07:45 AM)Jesse Johannesen Wrote: I think you just have to press stop twice on the master, no?
Jesse
That works for me
RE: Start/Stop and arming parts - cee- - 08-15-2021
Tried that, of course, but it doesn'work. Sigh...