+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: Program change bug (/showthread.php?tid=1594)
Program change bug - nummernoll - 06-27-2021
Hi,
It feels like there is a bug for changing the preset with program change.
I’ve set the midi input 2 and ch 16 as the MRCC control channel but when I send a PC-message on another channel but the same input the MRCC changes preset.
I have tried different input ports and the MRCC always changes preset regardless if the change messages comes on the specified channel or not.
I have the latest available firmware.
Thanks a lot for a great piece of hardware!
RE: Program change bug - Jesse Johannesen - 06-28-2021
I'll see if I can reproduce this but it's currently 114 degrees in my studio so it might be a little while before I can get at it. If I can recreate the issue I'll add a bug report to the list and we'll see about getting that fixed.
Thanks for finding that for me!
Jesse