Question about hooking up USB devices - Printable Version +- Conductive Labs Support Forum (https://conductivelabs.com/forum) +-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13) +--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14) +--- Thread: Question about hooking up USB devices (/showthread.php?tid=1589)

Question about hooking up USB devices - SoundRider - 06-26-2021 Hey all, ... as a proud owner of a MRCC, which I received a couple of days ago, I tested some of my USB-Midi gear. Now my question. Is there a kind of hand-shaking or switch-on procedure, which I should consider, when I plug in new gear in USB ports? Background: My Keystep worked instantly on the MRCC, but my Pyramid needed some attempts, before it was accepted. I cross-checked the Pyramid without changes with my MPC, connected it to one of the USB ports and it was plug'n play as expected. I wouldn't call this an issue, but it makes me wonder: should I first power up the MRCC, then connect unpowered USB gear, and finally switch on the gear, or should I have MRCC with power off, connect all gear, and power on MRCC as the last, or doesn't such a procedure matter at all Thanks in advance for any advice ... and many kudos to the makers of the MRCC ... I enjoy the flexibility and particularly the UI ... a great product. Love it! RE: Question about hooking up USB devices - ilmai - 07-01-2021 Scratch this, user error