+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: The NDLR (https://conductivelabs.com/forum/forumdisplay.php?fid=1)
+--- Forum: Feature Requests (https://conductivelabs.com/forum/forumdisplay.php?fid=4)
+--- Thread: Pad Qnt (/showthread.php?tid=1234)
Pad Qnt - MrBlaschke - 11-28-2020
Hi fellow NDLR‘s
I have a question regarding the Pad Qnt setting on Settings 3/3 Screen.
Would you consider to enable more than 1/4 and 1/8 qunatization?
I would like to have also 1/2 and 1/1 for my use-cases.
Is that possible?
Would be great.
You all stay safe and secure. Have good times!
Kind regards.
RE: Pad Qnt - Jesse Johannesen - 11-28-2020
(11-28-2020, 07:10 AM)MrBlaschke Wrote: Hi fellow NDLR‘s
I have a question regarding the Pad Qnt setting on Settings 3/3 Screen.
Would you consider to enable more than 1/4 and 1/8 qunatization?
I would like to have also 1/2 and 1/1 for my use-cases.
Is that possible?
Would be great.
You all stay safe and secure. Have good times!
Kind regards.
At this point it seems unlikely that such a change would be possible, because the memory (used for save slots among other things), is effectively out of space, every new option requires at least 8 bits, (1 bit times 8 save slots) and in this case the additional options would require 2 bits times 8 (one bit for 1/2 and 1 for 1/1). This means that the things we may be able to edit are things that fall into two catagories: changes to the global behavior of the NDLR, and things that can be options in the boot menu and not elsewhere.
I will add the request to our feature request log though and it's possible we may think of a way to do it, but I do know that the schedule is pretty full with MRCC firmware until after February.
Best,
Jesse
RE: Pad Qnt - MrBlaschke - 11-29-2020
Ok. Thanks for the info, Jesse.
I‘ll see if i can overcome this with some kind of external clock modifier then...at least as a workaround somehow.
No dealbreaker - awesome device, still going strong
RE: Pad Qnt - The Elf - 11-30-2020
I suppose I'm asking for something similar in that still want to see the ability to have everything (pad, drone, et al) changing on a bar boundary. When I showed the NDLR to my musical partner it was the first thing he asked about, so you (and I!) are not alone in wanting this!
RE: Pad Qnt - MrBlaschke - 11-30-2020
Well, glad that it is not something my quirky head made up and other seem to long for this too @The Elf
Sadly we can not „force“ this, but that is ok. We live in a world of „workarounds“.
RE: Pad Qnt - 0xF0 - 12-02-2020
I'll put my request in for this too. Really I'd like all parts to quantize on bar boundaries.
RE: Pad Qnt - endreola - 12-04-2020
Same here